Cost Guide

How much does an electrician cost in Kellyville?

Updated April 2026 · Independently researched · 14 min read

Largely newer homes built post-2000, many still under 20 years old. Electrical and plumbing is generally in good shape — common work is upgrades and additions rather than replacements. Strong growth area with high tradie demand. Kellyville is in outer Sydney — tradies from the inner city often add $38–$75 travel. Using a local Hills District tradie avoids this.

🅿️

Parking & access in Kellyville

Ample driveway parking throughout. Not a factor.

How Kellyville compares to nearby suburbs

Local tip for this area: Modern housing stock in the Hills means most jobs are faster and cheaper than older suburbs. Ask for fixed-price quotes rather than hourly — on modern homes, experienced tradies work quickly and fixed pricing gives you certainty. Check if your home is still under builder’s warranty before paying for defect-related repairs.

Prices shift suburb-to-suburb based on travel time, parking, and local housing stock.

Suburb	Electrician rate	Zone	Tradie supply
Castle Hill	$100–$180/hr	Outer	Moderate

A typical electrician visit in Kellyville costs $55–$135

for a standard residential job

That covers a call-out plus 1–2 hours in Kellyville — enough for a few powerpoints, a ceiling fan, or fault-finding. Switchboard upgrades run $65–$135, full rewires $7,600–$21,850.

+1.7% Electrician costs in Kellyville have risen this quarter, driven by strong construction activity and trade shortages. Q1 2026 vs Q4 2025

Average Electrician Cost in Kellyville

$125

per hour for standard residential work

Call-Out Fee

$55–$165

Powerpoint

$165–$275

Switchboard

$545–$1,310

Budget $85/hrAverage $125/hrPremium $165/hr

Electricians in Kellyville charge 05–90/hr per hour for standard residential work, with most jobs also attracting a call-out fee of $55–$160. The total cost depends on the job type, complexity, time of day, and your suburb.

Quick answerElectrician in Kellyville costs 05–90/hr /hr, with most averaging $125 /hr. GST included — verified April 2026. Get free Kellyville quotes →

Detailed Pricing — Kellyville 2026

Service	Low	Typical	High
Electrician (hourly rate)	$85/hr	$125	$160
Call-out / service fee	$55flat	$100	$160
New powerpoint installation	$160per point	$195	$275
Switchboard upgrade	$545per job	$875	$1,305
Ceiling fan installation	$160per fan	$275	$435
LED downlight installation	$65per light	$95	$135
Safety switch installation	$160per switch	$250	$380
Smoke alarm (supply + install)	$85per alarm	$145	$220
Rewiring (per room)	$1,095per room	$1,970	$3,280
Full house rewire (3-bed)	$8,740total	$13,110	$21,850
EV charger installation	$1,095installed	$2,185	$3,280
Outdoor lighting	$160per light	$330	$545
Fault finding / diagnostics	$160per visit	$275	$435
Emergency / after-hours	$160per visit	$330	$545

Prices verified April 2026 · Cross-referenced against 90+ Australian trade pricing sources · See methodology

Prices include GST. Based on Sydney metro area, Mar 2026. Outer suburbs may vary.

What to Know About Electrician Work in Kellyville

Kellyville property profile: Modern project homes, master-planned estates, and new townhouse developments from the 1990s–2020s era. Rapidly growing Hills District suburb with predominantly new housing stock.

Common electrical issues in Kellyville: Modern wiring but builder-grade fixtures and fittings failing after 10–15 years. Downlight replacements, additional power points, and home automation upgrades are common requests. Solar installations popular on new homes with large roof areas.

Access & parking: Excellent — wide streets and double garages throughout.

Electrician rates in Kellyville typically range from $80–$200/hr, with most electricians quoting around $125/hr. This reflects Kellyville's position in the hills zone of Sydney, where good tradie supply and easier access keep prices below the Sydney metro average.

What You'll Actually Pay — Real-World Scenarios

Rather than quoting hourly rates in isolation, here's what common electrical jobs cost all-in across Kellyville and nearby suburbs in 2026, including call-out, labour, and materials.

Install a single new powerpoint

$145–$240 total

One of the most common electrical jobs. If existing wiring is nearby and the switchboard has capacity, it's a 30–45 minute task. If the electrician needs to run new cable through walls or the switchboard needs a new circuit breaker, add $95–$190. Installing an outdoor weatherproof GPO costs more ($190–$335) due to marine-rated fittings and weatherproof covers. Modern plasterboard construction in most Hills homes makes powerpoint installation fast and efficient. Longer cable runs in larger homes are the main cost variable.

Full switchboard upgrade — old ceramic fuses to modern RCD/safety switches

$1,140–$2,660 total

This is the single most important electrical upgrade you can make in an older Kellyville home. If your house still has ceramic fuses or a bakelite switchboard, it doesn't have RCD (safety switch) protection — meaning a faulty appliance could kill you. A standard upgrade to a modern board with safety switches, circuit breakers, and labelling takes 3–5 hours. Larger homes or those needing new sub-mains from the meter box cost more. From November 2024, NSW requires safety switches on all power and lighting circuits in properties being sold, leased, or renovated — this is no longer optional. Homes from the 1980s–90s often have switchboards that are adequate but lack safety switches (RCDs). Adding RCDs to existing boards is a cost-effective safety upgrade.

Install 6 LED downlights in a living room

$570–$1,140 total

Typically $75–$145 per light installed (labour + fitting), depending on whether existing wiring and switching is in place or needs to be run fresh. Recessed downlights in concrete ceilings (common in apartments) cost significantly more than timber-framed ceilings. Quality LED fittings from brands like Clipsal or HPM run $29–$75 each. Cheap imported fittings may not meet Australian standards and can void your insurance. Large open-plan living areas in Hills District homes often need 8–12 downlights rather than the typical 6. Flat ceiling access makes installation efficient.

Ceiling fan installation — replacing an existing light

$190–$430 total

If there's an existing ceiling rose with power, it's a relatively quick job (45–90 minutes). The catch: not all ceiling boxes can support the weight and vibration of a fan. If the mounting point needs reinforcing or a fan-rated box, add $48–$145. Fan-supplied wiring controllers add another $75–$145 for the wall plate. Don't attempt ceiling fan installation yourself — the combination of electrical work at height is where accidents happen. Standard ceiling heights and modern construction make installation straightforward. Popular upgrade for bedrooms given the hot Hills District summers.

Full house rewire — 3-bedroom home

$7,600–$17,100 total

The big one. If your home was built before 1980 and has never been rewired, the wiring is likely degraded, undersized, and potentially dangerous. A full rewire replaces all circuits, installs a modern switchboard, and brings everything to current standards. The cost depends hugely on access (exposed roof cavity vs. concrete slab with no ceiling space), the number of circuits, and how many powerpoints and light fittings you want. Budget 3–7 days for a typical house. This is also the right time to add data cabling, USB powerpoints, outdoor circuits, and EV charger preparation. Most Hills homes are under 40 years old with adequate wiring. Full rewires are rare — more common is adding circuits for solar, A/C, or EV chargers.

Get a fair electrician quote in Kellyville

Licensed & reviewed professionals. No obligation, no spam.

Get Quotes in Kellyville →

What Affects Electrician Costs in Kellyville

Switchboard condition

If your Kellyville home has an old switchboard (ceramic fuses), most jobs will require an upgrade first — adding $65–$135 before the actual work begins.

Cable runs & access

Running new cables through walls, ceilings, or under floors takes time. Single-storey homes with roof access are cheaper than multi-storey or slab-on-ground.

Compliance requirements

Australian electrical standards change regularly. Older Kellyville homes may need additional work to meet current codes, even for simple jobs.

Number of points

Electricians often discount per-point rates when you're installing multiple powerpoints, lights, or switches in one visit.

Time of day

After-hours electrical work in Kellyville costs 50–100% more. Unless it's a safety issue, book during business hours.

Materials quality

Premium switches, smart home wiring, and commercial-grade components cost more than standard residential fittings.

How to Save Money on Electrician in Kellyville

Get quotes from licensed Kellyville electricians — prices vary significantly

Book during business hours to avoid after-hours surcharges of 50–100%

Bundle multiple small jobs (powerpoints, lights, fans) into one visit to save on call-out fees

Ask if a switchboard upgrade is needed before other work — it's a common hidden cost

Check your electrician holds a current licence on your state authority website

Ask for a fixed-price quote rather than hourly rate where possible for Kellyville jobs

Electrician day rate in Kellyville

Quick answerKellyville electrician charge a day rate of $760–$1,140 for a full 8-hour day — an effective hourly rate of $95–$145, below the standard Kellyville rate.

With Kellyville having the highest electrician labour rates in Australia, day rate billing becomes particularly valuable for homeowners with substantial electrical work to complete. A full-day rate in Kellyville typically runs $760–$1,140 for 8 hours of work — an effective hourly rate of $95–$145, which is noticeably lower than the standard Kellyville hourly rate of $125–$160 for shorter jobs. Day rates make economic sense whenever you can fill a full day with electrical tasks: rewiring multiple rooms, upgrading a switchboard plus installing new circuits, or tackling the electrical component of a large renovation.

The key to getting value from a day rate in Kellyville is preparation. Have every task mapped out in advance, ensure walls are opened or cables accessible where needed, and have any materials (light fittings, fans, power boards) already on site. Kellyville electricians are busy and will not wait around for you to figure out the scope mid-job. If you are unsure whether you have enough work for a full day, ask about a half-day rate (usually $430–$620 for 4 hours) or discuss an hourly cap arrangement. For larger renovation projects, some Kellyville electricians offer discounts for recurring weekly bookings.

Our Methodology

Prices on this page are compiled from publicly available cost guides, leading tradie marketplaces, peak industry body data, and individual tradesperson websites across Australia. We cross-reference ranges from multiple sources and adjust for city-specific cost differences based on advertised rates, salary data, and cost-of-living indicators. Our guides are independently produced — we don't employ tradespeople and have no commercial relationship with any service provider. All prices are estimates and will vary based on your specific job. Always get multiple quotes. Last reviewed April 2026. Read our full methodology →

Frequently Asked Questions

How much does an electrician charge per hour in Kellyville?

Licensed electricians in Kellyville charge below the Sydney average, reflecting modern housing that is easier to work on compared to the Sydney average. Rates depend on job complexity, time of day, and whether it’s a sole trader or larger company. After-hours rates are 1.5–2x standard. Get quotes for any job over $500.

Do I need to upgrade my switchboard?

If your Kellyville home has ceramic fuses, fewer than 12 circuits, or no safety switches, an upgrade is recommended. Properties with 1980s-2020s homes in established and new estates often have older systems that cannot handle modern loads like air conditioning, EV chargers, and induction cooktops. A modern switchboard is essential for safety and insurance compliance.

How much does it cost to install a powerpoint in Kellyville?

Adding a powerpoint in Kellyville costs a call-out fee plus 30–60 minutes labour and materials. The price depends on distance from the switchboard and wall material. In Kellyville with 1980s-2020s homes in established and new estates, routing cable through solid walls costs more than timber or plasterboard.

How much does it cost to install an EV charger at home?

EV charger installation in Kellyville varies by charger type, switchboard distance, and whether your supply needs upgrading. Many homes with 1980s-2020s homes in established and new estates need a switchboard upgrade or dedicated circuit for the 7–22kW load. Installation is straightforward if your switchboard has spare capacity.

Are electrical quotes free in Kellyville?

Most Kellyville electricians offer free quotes for standard jobs like switchboard upgrades, powerpoints, and lighting. Complex work requiring site inspections may incur a quote fee, usually waived if you proceed. Good tradie supply across the Hills District — free quotes are common for standard residential work.

What is the electrician day rate in Kellyville?

For larger jobs like full rewires or switchboard upgrades with multiple circuits, Kellyville electricians offer day rates covering 7–8 hours. Rates are below the Sydney average, reflecting modern housing that is easier to work on. Day rates give better value than hourly billing for substantial jobs. Materials and fixtures are quoted separately.

How much do Kellyville electricians charge for emergency after-hours work?

Emergency after-hours electricians in Kellyville charge 1.5–2x the standard rate. Power outages and sparking outlets are genuine emergencies. A flickering light or dead powerpoint can wait until business hours and save you hundreds. Emergency availability is available but at a premium.

How do I verify an electrician’s licence in NSW?

Check any electrician at service.nsw.gov.au/transaction/check-licence. They should hold an Electrical Contractor licence for quoting or a Qualified Supervisor certificate. In Kellyville, always verify before work starts — unlicensed electrical work voids insurance and is dangerous.

What does a Kellyville electrician’s call-out fee cover?

The call-out fee covers travel to your Kellyville property and the first 15–30 minutes of diagnostic time. In Kellyville, where 1980s-2020s homes in established and new estates may involve access considerations, fees tend to be competitive. Many electricians waive it if you proceed with the work.

How long does a switchboard upgrade take in Kellyville?

A standard switchboard upgrade in Kellyville takes 4–6 hours for like-for-like, or a full day if adding circuits. Properties with 1980s-2020s homes in established and new estates may take longer if existing wiring needs remediation. Power is off for most of the work — plan accordingly.